1
OKMO 预售公告条 · 三条并排版
🔥 PRE-SALE OKMO 1115 Miniature Gasoline Engine
Save $100 $680 $580
Ends 2026.12.1 · Ships 2026.12.6 PRE-ORDER →
🔥 PRE-SALE OKMO B03 Hit-and-Miss Engine Model
Save $100 $499.99 $399.99
Ends 2026.12.1 · Ships 2026.12.10 PRE-ORDER →
🔥 PRE-SALE OKMO B04 Air-Cooled Hit-and-Miss Engine
Save $100 $519.99 $419.99
Ends 2026.12.1 · Ships 2026.12.10 PRE-ORDER →

news

What is a Striling Engine?

What is a Striling Engine?

  • Friday, 20 September 2024
  • 0
  • 1612
  • 0

What is a Striling Engine?

A striling engine is an energy generation device that uses a reversible cycle to extract power.striling engine Its use of a gaseous working medium (air, hydrogen, etc) makes it more efficient than Otto and diesel engines. It is also a very quiet device, capable of producing two power pulses per revolution of the crankshaft.

The key to a striling engine is that it is a closed reversible cycle that does not require combusting fuel and does not need an exhaust.striling engine The ideal Stirling cycle is very similar to the Carnot cycle. Like the Carnot cycle there is a constant temperature between the hot and cold reservoirs (the hot reservoir in the example above). The heat entering during the isochoric leg where the temperature increases is totally rejected during the isochoric leg where the temperatures decreases. This results in the maximum possible efficiency for the engine.

In a real engine the process is much more complicated.striling engine The working fluid is kept in a sealed container, usually a metal cylinder. It can be heated in one end of the cylinder or in the middle by a hot plate (as shown in the picture above). The working fluid moves between the hot and cold sides of the engine via a displacer piston. When it is in the hot side it expands and pushes the piston out, then when it is in the cold side it contracts.

There is a hole in the center of the engine where the piston fits into. The displacer piston moves up and down inside the cylinder, heating the working fluid as it goes through its cycle. When it is in the hot side of the cylinder the heat is transferred to the wall of the cylinder through convection. The heat then raises the temperature of the working fluid until it reaches its maximum expansion. As the expansion happens the pressure of the working fluid drops rapidly. This lowering of the pressure in turn causes the gas to contract and suck back the piston.

During this process the displacer piston is pushing against a flywheel, which in turn rotates the crankshaft of the engine. As the crankshaft spins it generates electricity. The working fluid is then moved back to the hot side of the engine to repeat the cycle. The Stirling engine has the potential to be more efficient than an ordinary steam engine and it is very quiet. It is being developed for various applications including solar power generation, combined heat and power, Stirling cryocoolers, and marine engines. However, this is still a technology in its early stages and there are a lot of problems to be solved. It will probably be a few years before the first commercial Stirling engines are available. In the meantime they are being used in research labs around the world.

Tags:microcosm engine

0users like this.

Leave a Reply

Blog Categories

Get in touch

Refresh Code